The PLS100NZ is a self-leveling plumb, level and square line laser.
One of the brightest red line lasers available, the PLS100NZ has a full 360° horizontal laser line and 2x vertical laser lines.
Where the horizontal and vertical laser lines intersect are the square reference crosses. The 2 vertical laser lines intersect on the ceiling as a cross which marks the plumb up. The PLS100NZ additonally has a laser plumb dot down.
To save on battery power, the operator can choose to use the horizontal beam only, vertical beam only or all beams at once.
With automatic self levelling, place the PLS100NZ on the floor/surface or mount it to a suspended ceiling using the wall bracket.
For height control of the horizontal line, mount the PLS100NZ to a height elevating tripod.
The PLS100NZ can be used outside, where the laser lines cannot be seen, with the optional PLS SLD receiver between 5 and 30 meters. (See image direct left)
The PLS100NZ is designed for builders, ceiling contractors, tiling, glaziers, boat builders, kitchen and bathroom fitout, electrical technicians, structural steel and joiners, and commercial interior fitout contractors.
About PLS (Pacific Laser Systems)
Pacific Laser Systems started the compact plumbing, squaring and line laser market over 17 years ago in San Francisco, USA. Today, they still have the widest range of professional plumb, square, level and cross line lasers available anywhere!
PLS lasers are designed for the trade industry, with calibration, servicing and repair available through-out New Zealand through Accurate Instruments.
|
