A - 5m Aluminium Leveling Staff with 5mm reading

CODE: STAFF-5M5S5MM

5 metre, 5 section aluminium leveling staff with 5mm graduated readings. Height scale on the reverse. Commonly used with laser levels. Supplied with staff bag and level bubble.

B - 5m Aluminium Leveling Staff with E reading

CODE: STAFF-5M5SE

5 metre, 5 section aluminium leveling staff with E type 10mm graduated readings. Height scale on the reverse. Commonly used with automatic dumpy levels & theodolites. Supplied with staff bag and level bubble.

C - 7.6m Fibreglass Leveling Staff with E reading

CODE: STAFF-7.6M-FG-FT

7.6 metre, fibreglass leveling staff with E type 10mm graduated readings. Height scale on the reverse. Commonly used around power lines. Supplied with staff bag.

D - Staff Bag

CODE: STAFF-BAG

Staff cover for 5m aluminium type leveling staff.

E - Senshin SK202 8m Height Pole

CODE: HEIGHT POLE SK202

Fibreglass 8m height pole with internal tape measure. Suitable for measuring heights of trees for pruning and powerline clearance. Supplied with bag.

F - Cut n Fill Rod

CODE: CUT & FILL ROD

A 'mm' graduated aluminium rod with + or - 500mm measurements. + numbers in silver for "cut", - numbers in red for "fill". Laser receiver is clamped to an adjustable slide that moves up and down the scale. Supplied with bag.

G - Cut n Fill Staff

CODE: CUT & FILL STAFF

A combination of a Cut n Fill rod and 2.4 metre leveling staff. On one side is the Cut n Fill readings, on the other side is the staff height readings.
The 2.4 metre staff reading of this rod has readings of 1mm compared to other staves which usually read in 5 or 10mm increments.
Supplied with bag.